Carbon Dioxide Gas Sensor
With this sensor, you can easily monitor changes in CO2 levels occurring in respiration of organisms ranging from peas to humans. A 250 mL respiration chamber with probe attachment is included for running controlled experiments with small plants and animals. On the high range, you can explore human respiratory changes in CO2 levels based on exercise.The lower range offers more sensitivity for cellular respiration and photosynthetic metabolism studies.
Compass
Conductivity Probe
The Conductivity Probe determines the ionic content of an aqueous solution by measuring its conductivity. This probe has many applications in biology, chemistry, and much more. Include are: Vernier Conductivity Probe 90 mL bottle of 1000 S/cm NaCl standard solution Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout.Current Probe
The Current Probe measures DC and low-frequency AC currents up to 600 mA. Use Current Probes in combination with Differential Voltage Probes to investigate Ohm’s Law and explore series and parallel circuits. The 0.1 Ω shunt resistor minimizes changes to your circuit. If currents will exceed 1 A, use the High Current Sensor.Differential Voltage Probe
The Differential Voltage Probe is designed for exploring the basic principles of electricity. The Differential Voltage Probe reports the potential difference between the red and black leads. For example, if the black terminal is attached to something that is 2 V above ground, and the red to something that is 3 V below ground, it will report -5 V. The Differential Voltage Probe is the preferred voltage sensor in cases where more than one voltage sensor will be used in the same circuit. Included are: Vernier Differential Voltage Probe Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout. Click the checkout tab to check this item out.
Vernier Energy Sensor
Setting up a circuit to study renewable energy systems such as wind turbines or solar panels is easy with the Vernier Energy Sensor. Simply connect a source such as a small wind turbine or solar panel to one side and a load such as the Variable Load or a resistor on Vernier Resistor Board to the other side. The Energy Sensor measures the current and voltage of the system. Data-collection and analysis software, such as Logger Pro or LabQuest App can then calculate the power and energy output.
Dissolved Oxygen Probe
Dual Range Force Sensor
The Dual-Range Force Sensor is a general-purpose sensor for measuring pushing and pulling forces. Two ranges allow you to measure forces as small as 0.01 newtons and as large as 50 newtons. It can be used in a broad range of ways: As a replacement for a hand-held spring scale, Mounted horizontally on a dynamics cart to study collisions, Mounted on a ring-stand to measure forces in a vertical direction. Collect data from two Force Sensors simultaneously to study Newton’s Third LawEthanol Sensor
This sensor can be used in a wide range of tests and experiments. It can be used to determine the rate of ethanol production during fermentation and can also be used to measure the discrete amount of ethanol in a given sample. Included are: Vernier Ethanol Sensor Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout. Gas Pressure Sensor
The Gas Pressure Sensor can be used to monitor pressure changes in a gas. The range is wide enough to perform Boyles law yet it is sensitive enough to conduct vapor-pressure or pressure-temperature experiments. Teachers can use the Gas Pressure Sensor to monitor transpiration or respiration in an enclosed environment. Included are: Vernier Gas Pressure Sensor 2 Tapered valve connectors inserted into a No. 5 stopper 1 Tapered valve connector inserted into a No. 1 stopper 1 Two-way valve 18 inch Tygon tubing with Luer Lock connectors 20 mL syringe 2 White transpiration tubing clamps Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout. GO Temp Wireless
The Vernier Go Wireless Temp is a rugged, general-purpose, wireless temperature sensor you can use to remotely monitor temperature with a mobile device. Once connected the probe will start collecting real-time temperature data. Included are: Go!Temp Wireless temperature probe USB Charging cable Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout.
GO Temp Probe
The Vernier Go Wireless Temp is a rugged, general-purpose, wireless temperature sensor you can use to remotely monitor temperature with a mobile device. Once connected the probe will start collecting real-time temperature data. Included are: Go!Temp Wireless temperature probe USB Charging cable Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout.
Hand Dynamometer
The Hand Dynamometer can be used to measure grip strength, pinch strength, and to perform muscle fatigue studies. This probe allows students can be used to study muscular health and activity. Included are: Vernier Hand Dynamometer Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout.
Hand-Grip Heart Rate Monitor
The design of the Hand-Grip Heart Rate Monitor makes it easy to monitor heart rate before, during, and after exercise. Data are wirelessly transmitted to a Vernier interface using the Heart Rate Receiver. Included are: Heart Rate Hand Grips Heart Rate Receiver Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout.
Hobo Data Loggers
These sensors detect changes in temperature, humidity, and light and displays that information to a computer or laptop. Each data logger also comes equipped with a clear submersible case. Included are: HOBO H8 Data Logger Magnent Hook Double sided tape Instruction Manual HOBO Submersible case O-Ring Two O-Ring lubricants Metal Ring.
Kill-a-watt Monitor
Electricity bills are rising. Now you can cut down on costs and find out what appliances are actually worth keeping plugged in. Simply connect these appliances to the Kill A Watt®, and it will assess how efficient they really are. Large LCD display will count consumption by the Kilowatt-hour, same as your local utility. You can calculate your electrical expenses by the day, week, month, even an entire year. Also check the quality of your power by monitoring Voltage, Line Frequency, and Power Factor. Now you´ll know if it is time for a new refrigerator or if that old air conditioner is still saving you money.Lab Quest
LabQuest is a standalone and computer interface for Vernier sensors. Use its color touch screen to collect, graph, and analyze data in your classroom or in the field. With its breakthrough data-collection technology for science educators, students can see where science exploration takes them. This device is water resistance and easy-to-use. Included are: The Vernier LabQuest system USB cable Computer Software User Guide Power Supply Stylus and tether.Lab Quest Mini
LabQuest Mini brings the power of Verniers award-winning LabQuest technology to teachers who dont need the versatility of a standalone device. The perfect solution for educators collecting data with a Windows or Macintosh computer. Included are: Vernier Lab Quest Mini USB cable Instruction Manual.
Lab Quest 2
Vernier LabQuest 2 is a standalone interface used to collect sensor data with its built-in graphing and analysis application. The large, high-resolution touch screen makes it easy and intuitive to collect, analyze, and share data from experiments. Its wireless connectivity encourages collaboration and personalized learning. You can also use LabQuest 2 as a USB sensor interface using Logger Pro software or with our Graphical Analysis app for iOS, Android, or Chrome to stream data wirelessly to one or more mobile devices. "Included in the LabQuest2 kit is: Included in the LaQuest2 kit is: The Vernier LabQuest2 system USB cable Computer Software User Guide Power Supply Stylus and tether
Lab Quest charging stations
Easily charge and store your LabQuest 1, LabQuest 2, and LabQuest Stream. Its compact size and multi-bay charging capabilities keep your interfaces organized and fully charged so they are ready when you are. There are four charging ports per charging station so multiple devices can be charged at one time. Each station stores and charges four interfaces. Each station includes interchangeable inserts for the original LabQuest, LabQuest 2, and LabQuest Stream. Compact design efficiently uses lab bench space. Charging indicators let you know your interfaces are charging and when charging is complete. Light Sensor
The Light Sensor approximates the human eye in spectral response. Use it for inverse square law experiments or for studying polarizes, reflectivity, or solarenergy. Included are: Vernier Light Sensor Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout. Motion Detector
The Motion Detector uses ultrasound to measure the position of carts, balls, people, and other objects. Measure objects as close as 15 cm and as far away as 6 m. Sensitivity switch reduces noise and produces higher quality data for studying dynamics carts on tracks. Attaches easily to the Vernier Dynamics System. Pivoting head allows for flexibility in the experiment setup. Included are: Vernier Motion Detector Digital Sensor Cable Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout. Oxygen Gas Sensor
The O2 Gas Sensor measures oxygen concentration in air, and is temperature compensated for use in different environments. It has a wide measurement range, allowing it to be used to study human and cellular respiration. The O2 Gas Sensor also includes a 250 mL bottle that can be used to study the rusting of iron or as a respiration chamber for monitoring plants and insects. Included are: Vernier Oxygen Gas Sensor 250 mL gas sampling bottle Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout.
Pocket Weather Readers
The Kestrel 2500 Pocket Weather Meter measures wind and temperature with total accuracy, and has the added benefits of an air pressure sensor that provides altitude and barometric information. Kestrel 2500 technology enables you to follow changes in air pressure that help predict impending changes in the weather. In addition to the Kestrel 2500, we have 6 Ambient Weather Handheld Wind Meters. The versatile LCD display allows you to switch between wind speed units of measure (mph, Km/h, m/s, ft/min or Knots), temperature units of measure (degrees Fahrenheit or Celsius), temperature and wind chill, average, instant and maximum wind speed. Includes backlight for low light and night time viewing. Currently we have: 2 Kestrel 2500 Pocket Weather Reader with cover Instruction Manual included 6 Ambient Weather Handheld Wind Meter with lanyard
Relative Humidity Sensor
The Relative Humidity Sensor can be used for weather studies, monitoring greenhouses, or determining days when static electrical discharges could be a problem. Included are: Vernier Relative Humidity Sensor Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout.
Scale
Designed for use in laboratory, industrial or education applications, the OHAUS Scout Pro continues the tradition set by the OHAUS Scout and Scout II products. Featuring easy-to-use two-button operation, a high-contrast LCD display, multiple weighing units, four application modes, and the option of either RS232 or USB connectivity, the Scout Pro is the portable balance for your needs. Included are: OHAUS Scout Pro scale Charging cord 200 g weight
Sound Level Monitor
The Sound Level Meter is used to measure sound level in decibels (dB). Switches on the meter are used to select dBA or dBC weightings and fast or slow response times. The Sound Level Meter has an LCD panel to use it as a stand-alone device. A Maximum Level Hold switch provide flexibility in the standalone mode. Included are: Vernier Sound Level Meter Wind screen (black foam cover for the sensing element) Cable to connect the sensor to a data-collection interface Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout.
Tris-Compatible Flat pH Sensor
The Tris-Compatible Flat pH Sensor is a highly versatile sensor. Because the glass membrane is flat instead of a bulb, it is more durable, easier to clean, and allows for flat surface measurements or smaller sample sizes. It features a sealed, gel-filled, double-junction electrode, making it compatible with Tris buffers and solutions containing proteins or sulfides. The flat glass shape also makes it useful for measuring the pH of semisolids such as food or soil slurries. Included are: Tris-Compatible Flat pH Electrode BNC Electrode Amplifier pH Storage Solution Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout.
Turbidity Sensor
The Turbidity Sensor measures the turbidity of fresh-water or seawater samples in NTU (Nephelometric Turbidity Units, the standard unit used by most water collection agencies and organizations). Its small, sleek design and simple setup make it easy to use at the collection site or in the classroom. In addition to water quality studies, it can also be used to monitor precipitate formation or algae and yeast populations in chemistry and biology classes. Included are: Vernier Turbidity Sensor 100 NTU turbidity standard One glass cuvette Material Safety Data Sheet for StablCal Formazin Standard Instruction ManualUVB Sensor
The UVB Sensor is an ultraviolet light sensor that responds primarily to UVB radiation (approximately 290 to 320 nm). It is ideal for experiments using sunlight as your UV source and is the sensor recommended for the UV experiments in our lab books. Included are: Vernier UVB Sensor Built-in light diffuser Instruction ManualVariable Load
The Vernier Variable Load is used in conjunction with the Vernier Energy Sensor to provide a range of resistive loads for projects such as wind turbines or solar panels. Students can adjust the potentiometer to provide resistances between 6 and 255 _, allowing them to determine the optimal load on a system. Included are: Vernier Variable Load Two insulated jumper wires fitted with mini-alligator clips Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout.
pH Sensor
Use the pH Sensor just as you would a traditional pH meter with the additional advantages of automated data collection, graphing, and data analysis. Typical activities using our pH sensor include: Acid-base titrations Studies of household acids and bases Monitoring pH change during chemical reactions or in an aquarium as a result of photosynthesis Investigations of acid rain and buffering Analysis of water quality in streams and lakes Included are: Vernier pH Sensor pH storage solution pH storage solution bottle Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout.
Spring Scales
This scale measures items in both grams and Newtons making it the ideal scale to measure both weight and force.
Volt Meter
Get accurate readings for DC voltage, DC current, AC voltage, resistance, transistor test, diode test, and battery test. Easy-to-read LCD readout, positive set selector switch and 32 leads.Included are: Cen-Tech 7 Function Multimeter Leads Instruction Manual
Voltage Probe
The Voltage Probe is a bipolar sensor. The black lead is grounded along with the interface, and the sensor reports the potential difference between the red lead and ground. It can be used to measure the potential in DC or AC circuits. Included are: Vernier Voltage Probe Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout. Click the checkout tab to check this item out.
Optical DO Probe
The Vernier Optical DO Probe makes it easy to measure the dissolved oxygen concentration in water. Perfect for the field or for the laboratory, this plug-and-play probe requires no calibration, no filling solution, no warm-up time, and no stirring. Included are: Vernier Optical DO Probe Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout. Click the checkout tab to check this item out.
Pyranometer
The Pyranometer measures the power of electromagnetic radiation. It is sensitive to near infrared, visible, and UV radiation, where 90% of solar energy is concentrated. It reads in watts per square meter, so it is great for experiments with solar cells and calculating their efficiency. Included are: Vernier Pyranometer Pyranometer lens cover Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout. Click the checkout tab to check this item out.
Soil Moisture Sensor
The Soil Moisture Sensor is used to measure the volumetric water content of soil. This makes it ideal for performing experiments in courses such as soil science, agricultural science, environmental science, horticulture, botany, and biology. Simply insert the sensor into the soil to be tested and the volumetric water content of the soil is reported in percent. Included are: Vernier Soil Moisture sensor Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout. Click the checkout tab to check this item out.
Temperature Probe
The Stainless Steel Temperature Probe is a rugged, general-purpose temperature sensor that can be used in organic liquids, salt solutions, acids, and bases. Use it as you would use a thermometer for experiments in chemistry, physics, biology, Earth science, and environmental science. Included are: Vernier Temperature Probe Instruction Manual **This item requires the use of a LabQuest computer interface which is also available for checkout. Click the checkout tab to check this item out.
Thermometer
